By Kenneth Hillock, 23 October 2024
Securing your wildlife camera needn’t be costly. Here we show you everything you need for a low cost alternative. (Just remember that these are a deterrent, and no lock is fool proof, your camera is your responsibility).
Materials: (Approx cost £17 for 6 securing straps)
5mm Steel wire (20m)
U-bolts suitable for 5mm wire (x6)
Insulation tape
8mm spanner
Safety gloves
Safety First: Before starting, make sure to put on your safety gloves to protect your hands from potential cuts or scratches.
Measure and Cut the Wire: Measure the steel wire according to the size of the object (like a tree or post) where you’ll be securing the camera trap. Mark where you want to cut with some insulating tape.
Use the saw to cut the wire to the desired length. The insulation tape will help to stop the ends fraying.
Set up your camera on your tree or post : thread the steel wire through your camera securing points
Secure the Wire: Wrap the wire around the object where you’re placing the camera trap. Make sure it’s secure.
Thread the Wire Through the U-Bolts: Thread the cut wire through the U-bolt. The U-bolt should be suitable for 5mm wire.
Tighten the U-Bolt: Use the 8mm spanner to tighten the U-bolts, securing the wire in place.
Remember, the goal is to make sure your camera trap is secure and not easily noticeable or accessible. This method is relatively cheap and should help deter theft or tampering. Always check local regulations and permissions before setting up a camera trap. Happy wildlife watching!
North East Scotland Mammal Network 